SFR-B
GSFR
SFR-B
GSFR
SFR-B
GSFR
Assembly: GSFR* Wheels to SFR
1.
Insert the Intermediate Nozzle until its collar
rests against the housing and tighten the
screw.
2.
Assemble the Guide Wheel and tighten
the screw.
Attention:
Always use the correct
wheel set for each wire thickness.
3.
Assemble the Blade first, then mount the
Blade Clamp onto the same axis and tighten
the screw.
Caution:
handle the blade carefully
to avoid injury.
4.
Insert the Inlet Nozzle into the hole and
tighten the screw.
1
GSFR* with Solder Wire Perforation
GSFR* without Solder Wire Perforation
4
1
2
2
3
3
4
Blade
Blade Clamp
Inlet
Nozzle
Guide
wheel
Traction
Wheel
Support
Wheel
Inter.
Nozzle
Inter.
Nozzle
*Not included, sold separately.
For this operation, disconnect the device, and take off the cover by pressing the tabs. Use the allen
key and the spanner, provided with the SFR, to assemble the components shown below.
1.
Insert the Intermediate Nozzle until its collar
rests against the housing and tighten the
screw
2.
Assemble the Support Wheel and tighten
the screw.
Attention:
Always use the correct
wheel set for each wire thickness.
3.
Assemble the Traction Wheel onto the axis
and tighten the screw.
4.
Insert the Inlet Nozzle into the hole and
tighten the screw.
Inlet
Nozzle
www.jbctools.com
5
