2. You can easily adjust the length of the tube by opening the guide clamp.
Replacing the guide tube
1. Open the guide clamp, take off the guide tube and insert the new one.
For this operation, disconnect the tool from the control unit.
Accesories
Solder Feed Handle Stand
Ref. SF-SD
It prevents the SF280-A Solder Feed Handle
from rolling away while working.
Guide Set
Ref. GSF05 - wire Ø 0,5 mm
Ref. GSF08 - wire Ø 0,8 mm
Ref. GSF10 - wire Ø 1 mm
Ref. GSF15 - wire Ø 1,5 mm
Ref. GSF08V - wire Ø 0,8 mm
Ref. GSF10V - wire Ø 1 mm
Ref. GSF15V - wire Ø 1,5 mm
without
V-Cut
with
V-Cut
www.jbctools.com
3
