jbc SF, Руководство пользователя

Страница: 4 / 24

Tool assembly
Connect the tool to the control
unit.
1.
Push the guide to the end
and tighten the screw.
2.
Connect the jack.
Load the solder wire
1.
Use the lock rings to prevent the reel from sliding on the bar.
2.
Feed the wire into the guide (2) until it reaches the drag wheels.
1
1
2
Guide tube
1
2
3.
Press the button on the tool
or the wire-load button on the
station.
4.
Make sure the wire passes
through the tube.
insert to the end
4