
Peripherals
Port 2-DR
17:14
Pedal
None
Module
None
Module
MV_a
None
MENU
17:14
?
Install
MODULE
Air pump
Postpone
4
5
Control Unit
Ref. DDE-A
DME-A
Module cable
Ref. 0014874
Pneumatic Desoldering Module
Ref. MVE-A
To another
module
To
Pedal
Ref. P-005
Suction Filter
Ref. 0821830
Ref. DR560-A
DS360-A
Stand
Ref. DR-SD
DS-SD
Tool
1.
After connecting the module, enter the
Peripherals
Menu
and select the port which
you want to join with the module.
2.
Select the module from the list of peripheral
connections. Remember your first connection
is denoted as “a”, the second being “b”, etc.
(e.g. MV_a, MV_b,...)
3.
Press Menu or Back to save changes.
Initial Set up
Features
When a new module is detected, a
pop-up screen
appears and proceed as indicated.
If no screen is shown, click on the
icon
on the main bar and follow the steps.
Once set up, you can change the module settings by entering the
Peripherals
Menu.
For DDE Control Unit
For DME Control Unit
For DME and DDE Control Units
Appears only
when the
installation is
postponed
Air pressure
(4-6 bar)
Tubing Ø4 x Ø6 mm
(Not supplied)
www.jbctools.com