jbc KN-A, Инструкция по эксплуатации

Страница: 6 / 12

6
Clean periodically
Maintenance
Before carrying out maintenance or storage, always allow the equipment to cool.
- Use a damp cloth to clean the casing, the
stand and the tool. Alcohol can only be used
to clean the metal parts.
- Check periodically that the metal parts of
the tool/stand are clean so that the station
can check the tool status.
- Maintain tip surface clean and tinned prior to
storage in order to avoid tip oxidation. Rusty
and dirty surfaces reduce heat transfer to the
solder joint.
- Periodically check all cables and tube
connections.
- Replace any defective or damaged parts.
Use original JBC spare parts only.
- Repairs should only be performed by a
JBC authorized technical service.