Hot Air Accessories
(not supplied with JT-Q)
For small components
(fig. 1 and 2).
For big components
(fig. 3 and 4).
10
11
Only perform this operation when the element is cold and the unit is disconnected from the mains.
1.
Loosen the screw.
2.
Pull the heating element away from the handle.
3.
Connect the new heating element, ensuring its pushed all the way in.
4.
Tighten the screw.
Replacing the Heating Element
Heating Hose Set
Ref. JT-T1A (100V / 120V)
JT-T2A (230V)
Heating Element
Ref. 0014107 (230V)
0014105 (100V / 120V)
JT Handle
Ref. JT-A
1.
Ensure that the tool is turned off.
2.
Use a spanner to unscrew the connecting nut.
3.
The tube end of the new heater must be inserted
so that the longitudinal rib fits into the groove.
4.
Follow the same steps conversely.
Changing the JT-TA Heater Hose Set
1
2
3
4
Extractor Desk
Extractor desk
Ref. 0008752
Protectors
and extractors
not included.
This accessory lets you quickly switch between different models of extractors and protectors.
There are two drawers for storage.
Find the model that best suits your soldering needs in
www.jbctools.com
Protector
Extractor
Manual extractor
Tripod
We recommend using the pro tripod.
We recommend using the extractor.
10
www.jbctools.com
11
