jbc JNAU, Инструкция по эксплуатации, Страница: 8 / 16

Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V
OK
OK
Maximum working temp: 250ºC (482ºF)
Fuse holder
Fuse holder
Fuse
OK
OK
Point
2/5
Temp
250
ºC
Flow
60
%
Time
2m 30s
3m 18s
240
ºC %
80
3m 18s
Profile ABC / Air temp
17:14
Profile ABC / Air temp
Hot Air Temp Air Flow
450
400
350
300
250
150
100
50
200
Power Te mp
17:14
Ext. temp
17:14
20
ºC Power
45%
120ºC Selected
TC
Te mp .
4m 38s
400
ºC
80
%
400ºC Selected
Protec�on
Hot Air Temp. Air Flow Selec.
NH
NH
NH
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAU
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAU
Station
Made in EU
PATENTED
STAND PEDAL
ROBOT AUX
Pedal*
(Ref. P-405)
By means of the pedal connection NH Heater Hose Set (Ref. NH-A) for hot air function and the Pick &
Place Tool (Ref. T260-A) for suction function could be activated and deactivated.
Pedal and Tool Settings
Start Mode
Select menu . Then by pressing select “TOOL” and confirm with .
Select “PEDAL FUNCTION” and confirm with OK button. Then choose between “HOT AIR” and “SUC-
TION”. Confirm again with OK button.
Pedal Activation Mode
In both applications, HOT AIR and SUCTION, are 2 different pedal activation modes available.
One Touch Mode
Press the pedal once to activate the function. Press again to stop te function.
Pressed Mode
Start the function by pressing the pedal continuously and stop the function by lifting the pedal. The
function is active as long as the pedal is kept pressed.
Select “PEDAL” confirm with OK button and choose between PRESS ONCE” and “PRESS CONT”.
Confirm again with OK button.
The pedal should be plugged in at the
rear of the station into its connector,
which ist marked with “Pedal”, to use
the Pedal functionality.
*not included
8