www.jbctools.com
Soldering Net
Remotely manage and monitor as many stations as your Windows PC can handle.
any JBC station
JBC
Manager
software
USB Hub
Functions:
- Set all the station parameters
from your PC.
- Organize groups of stations and
set all their parameters at the
same time.
- Store specific configurations for
later uses.
- Analyze the soldering graphics
of the stations on your PC and
export them.
1.
Download the
JBC Manager software
and the user manual from
www.jbctools.com/manager.html
2.
Connect the stations via USB-B connector and the PC will automatically detect them.
3.
The notification will be displayed on the station.
Update the station software
1.
Download the JBC Update File from
www.jbctools.com/software.html
and save
it on a USB flash drive. Preferably one with
no other files.
JBC
Update File
2.
Insert the USB flash drive to the station.
The icon is diplayed while updating.
Clean periodically
Maintenance
Before carrying out maintenance or storage, always allow the equipment to cool.
- Clean the station screen with a glass cleaner
or a damp cloth.
1.
Pull off the fuse holder and remove the
fuse. If necessary use a tool to lever it off.
2.
Press the new fuse into the fuse holder
and replace it in the station.
- Use a damp cloth to clean the casing and
the tool. Alcohol can only be used to clean
the metal parts.
- Periodically check that the metal parts of
the tool and stand are clean so that the
station can detect the tool status.
Fuse holder
Fuse holder
- Maintain tip surface clean and tinned prior
to storage in order to avoid tip oxidation.
Rusty and dirty surfaces reduce heat
transfer to the solder joint.
- Periodically check all cables and tubes.
Fuse
- Replace a blown fuse as follows:
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
8
9
8
9
