Exploded View
Before carrying out maintenance or storage, always unplug the equipment.
- Clean the casing with a damp cloth. Make sure to use a soft cloth when cleaning the front.
- Periodically check the cables and tubes.
- Replace a blown fuse as follows:
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
6
7
Maintenance
1.
Loosen the black cap to remove the fuse.
2.
Fit the new fuse into the holder and
screw back into the module.
Safety
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- Only fume extractors can be used with the fume extractor switch.
- Do not use the soldering stations for any purpose other than soldering or rework. Incorrect use
may cause fire.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- The soldering tip, the stand and the metal part of the tool may still be hot even when the station
has been turned off. Handle with care.
- Do not leave the appliance unattended when it is on.
- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.
- Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.
- Be careful of the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
Fuse holder
Fuse
www.jbctools.com
