jbc DSS-D, Руководство пользователя

Страница: 9 / 16

9
Improve thermal transfer by cleaning the tip after each solder joint.
Tip Cleaning stand
Optional
Brass wool
Ref. CL6210
Inox wool
Ref. CL6205
Brushes
Ref. CL6220
Tip-tinner
Ref. TT-A
Sand
Ref. CL6211
Splashguard
Non-slip base
Sponge
Ref. S0354
Wiper
Ref. CL0236
Very effective cleaning
method. It leaves a small layer
of solder on the tip to prevent
oxidation between cleaning
and rewetting.
It minimises splashing
of solder particles
when using the metal
or brass wool.
You don’t need to
hold the base while
cleaning tips
The least harmful cleaning
method. Keep the sponge damp
with destilled water when working
to avoid tip wear.
A temperature resistant receptacle
allows the operator to remove excess
solder by gently tapping or wiping.
Wiper can be easily removed to clean it.
Tapping: Wiping:
Tap gently to remove
the excess of solder. Use the slots to wipe
off any remaining
particles.
www.jbctools.com