jbc DR560, Инструкция по эксплуатации

Страница: 3 / 8

DS360
DR560
DR560
DR560
DR560
DR560
Features and Connections
Desoldering Iron
Ref. DR560-A
Tip
Ref. C560003
to Desoldering Module
to Stand
Suction Filter
Ref. 0821830
Supplied with desoldering module
Desoldering Process
Use a tip with a larger diameter than the pad to achieve maximum aspiration and thermal efficiency.
Place the tip with the
component terminal in
the hole.
After pressing the desoldering key there is a slight delay until the self-contained vacuum pump
stops. This makes sure that the vacuum circuit is completely empty. If any solder remains are left
on a terminal after desoldering it, resolder it with fresh solder and repeat the desoldering operation.
When the solder liquefies,
gently rotate the tip so
that the compo nent
terminal can be lifted off. Press the vacuum pump
button long enough to
remove the solder.
3. Aspirating 1. Placing 2. Rotating
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm