jbc DME Series, Инструкция по эксплуатации, Страница: 9 / 16

19:29
?
19:29
?
19:29
?
350
Port
1
Power
45%
Selected 350ºC
Port
1
T245
Sleep
Tool in the stand
Actual Temp. 180º
Delay to hibernation: 29:30
Port
1
T245
Hibernation
Actual Temp. 25ºC
MENU
MENU MENU
C245003
Peripherals
19:29
Port 1 2 3 4
MS a
?
PERIPHERAL
Peripheral 1 plugged:
Electric Suction Module
Setup Postpone
Peripherals
19:29
Port 1 2 3 4
MS a
PD a
?
Port 2
MENU 19:29
?
Port 1
Port 3 Port 4
Hibern. Sleep
350º
C120001
C560001
Hibern.
C210001
C245903
19:29
Port 1 2 3 4
MS a
?
MODULE
Nitrogen
Install Postpone
MENU
19:29
?
19:29
?
19:29
?
350
Port
1
Power
45%
Selected 350ºC
Port
1
T245
Sleep
Tool in the stand
Actual Temp. 180º
Delay to hibernation: 29:30
Port
1
T245
Hibernation
Actual Temp. 25ºC
MENU
MENU MENU
C245003
Peripherals
19:29
Port 1 2 3 4
MS a
?
PERIPHERAL
Peripheral 1 plugged:
Electric Suction Module
Setup Postpone
Peripherals
19:29
Port 1 2 3 4
MS a
PD a
?
Port 2
MENU 19:29
?
Port 1
Port 3 Port 4
Hibern. Sleep
350º
C120001
C560001
Hibern.
C210001
C245903
19:29
Port 1 2 3 4
MS a
?
MODULE
Nitrogen
Install Postpone
MENU
19:29
?
19:29
?
19:29
?
350
Port
1
Power
45%
Selected 350ºC
Port
1
T245
Sleep
Tool in the stand
Actual Temp. 180º
Delay to hibernation: 29:30
Port
1
T245
Hibernation
Actual Temp. 25ºC
MENU
MENU MENU
C245003
Peripherals
19:29
Port 1 2 3 4
MS a
?
PERIPHERAL
Peripheral 1 plugged:
Electric Suction Module
Setup Postpone
Peripherals
19:29
Port 1 2 3 4
MS a
PD a
?
Port 2
MENU 19:29
?
Port 1
Port 3 Port 4
Hibern. Sleep
350º
C120001
C560001
Hibern.
C210001
C245903
19:29
Port 1 2 3 4
MS a
?
MODULE
Nitrogen
Install Postpone
MENU
OK
350
ºC
Port
1
Power
45%
Temp. Levels
T245
250 350 380
17:14
OK
350
ºC
Port
1
Power
45%
Temp. Levels
T245
250 350 380
17:14
OK
350
ºC
Port
1
Power
45%
Temp. Levels
T245
250 350 380
17:14
Operation
JBC’s Most Efficient Soldering System
Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user
can work at a lower temperature and improve the soldering quality. The tip temperature is further
reduced thanks to the Sleep and Hibernation modes which increase up to 5 times the life of the tip.
3. Hibernation 1. Work 2. Sleep
When the tool is lifted from the
stand the tip will heat up to the
selected temperature. When the tool is in the stand, the
temperature falls to the preset
Sleep temperature. After longer periods of
inactivity, the power is cut off
and the tool cools down to
room temperature.
Long period
in the stand
Tool Settings:
· Operating Temp.
Change Work temperature from
90 to 450 ºC.
or steps of ±5 ºC / ºF
or steps of ±50 ºC / ºF
Tool Settings:
· Temp. Levels
Press , select
Tool Settings
and activate the
Temp. Levels
option.
or steps of ± 5 ºC / ºF.
Tool Settings:
· Sleep
Change Sleep temperature and
set Sleep delay from 0 to 9 min
or no Sleep.
Tool Settings:
· Hibernation
Change Hibernation delay
from 0 to 60 min or no
Hibernation.
OK
350
ºC
Port
1
Power
45%
Temp. Levels
T245
250 350 380
17:14
OK
350
ºC
Port
1
Power
45%
Temp. Levels
T245
250 350 380
17:14
9
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - color gris
200 mm
300 mm
Clean periodically
Maintenance
Before carrying out maintenance or storage, always allow the equipment to cool.
1.
Pull off the fuse holder and remove the
fuse. If necessary use a tool to lever it off.
2.
Insert the new fuse into the holder and
return it to the station.
- Clean the station screen with a glass cleaner
or a damp cloth.
- Use a damp cloth to clean the casing and the
tool. Alcohol can only be used to clean the
metal parts.
- Periodically check that the metal parts of the
tool and stand are clean so that the station can
detect the tool and establish its status.
- Maintain tip surface clean and tinned prior to
storage in order to avoid tip oxidation. Rusty
and dirty surfaces reduce heat transfer to the
solder joint.
- Periodically check all cables and tubes.
- Replace a blown fuse as follows:
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Fuse holder
Fuse
Fuse Holder
USB Connector
Download the latest software from our website
to improve your soldering station at
www.jbctools.com/software.html.