2
DI/
1 TOOL CONTROL UNIT
DESOLDERING PUMP
MS-A
DESOLDERING STAND
DR-SA
CONTROL UNIT
DI-2B / DI-1B / DI-9B
Connectable tools:
T210, T245, PA120, HT420, AP130, DR560
and
DS360.
Connectable modules:
MS, MV
and
MN.
CONTENTS
Power Cord Socket
USB Connector
to PC
JBC stations intelligently manage the tool temperature:
Work mode:
When the tool is used, pre-set work temperature is 350º C.
Sleep mode:
When the tool is in the stand, the temperature goes down to 220º C.
Hibernation mode:
After longer periods of inactivity (pre-set i.e 30 minutes), the power is cut off and the
tool cools down to room temperature.
The advantage of this heat management is lifespan increase which ensure low cost of ownership
HEAT MANAGEMENT
DI
1 tool
control unit
Reference Guide