CD-Q:
OK
CD-Q:
OK
CD-Q:
OK
Changing the Grips
Put the slide-on tabs into the
new grip.
Push the grip with the tabs
onto the handle.
To remove the tabs, hold the
grip and pull. Use a pliers if
necessary.
tabs
new grip
1. Inserting tabs
2. Inserting handle
3. Removing tabs
The Sealing Plug is meant to prevent undesirable flux vapors or particles from entering inside the
tool. Its usage is highly recommended for intensive applications when soldering in exposed to FOD
environments or for applications where the soldering iron works close to vertical position.
Sealing Plug Replacement
Before replacing the sealing plug, unplug the power supply and make sure the device is not hot.
Note the Sealing Plug mount-
ing position. The chamfered
side has to be positioned
towards the Handle.
2. Mounting position
3. Inserting the Sealing
Plug
1. Removing the Sealing
Plug
Sealing
Plug
Handle
Gently push the Sealing Plug
inside the handle until it is
completely into the Handle.
Handle and Sealing Plug
edges have to be aligned.
Enter a small shaft or screw-
driver in order to gently lift
and pull the Sealin Plug.
Do not insert the tool more
than 8 mm deep.
Never use a cartridge to do
this operation.
8
Easily replace the Grips for T210-A (0018658) using the slip-on tabs.
The sealing plug for T210 is the Ref. OB1000.
