Bottom view
Continuous mode
The tip cleaner has a second operating mode whereby the brushes run continuously.
Switch ON/OFF
Turn the switch to OFF and
the brushes are activated in
continuous mode.
Changing brushes and cleaning
Replace the brushes easily and clean the solder collector tray as follows:
1. Opening the splashguard
2. Removing the brushes
3. Removing the solder
collector tray
Unplug from the mains and
press the tab at the top to
open the splashguard.
Remove by pulling out the
brush at the bottom end.
Once cleaned, return the tray
followed by the brushes.
4
