jbc CF, Руководство пользователя

Страница: 11 / 12

11
SAFETY
- Keep children and non-trained personnel away from the equipment.
- The mains cable must be plugged into approved bases.
- The tool should be placed in the stand when not in use. This way the sleep mode will be activated.
- The soldering tip and the metal part of the tool may still be hot even when the station is turned off.
Handle with care.
- The stand can also be hot as well. To adjust the angle, turn the station off and wait until the cartridge
cools down.
- Be careful with the remains of liquid tin. In contact with skin, it can cause burns.
- Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.
- Do not work on electrically live parts. Antistatic handle of soldering irons is electrically conductive.
- Be careful with the smoke produced when soldering.
- Wear appropriate protection glasses and gloves when working to avoid any damage.
CAUTION
- Incorrect use of tool may cause fire.
- Be careful when using the tool in areas where inflamable products are stored.
- Heat can cause inflamable products to ignite even when not in sight.
It is imperative to meet the following safety guidelines to protect health and prevent
electric shock, injury, fire or explosions.