CD-Q:
OK
CD-Q:
OK
CD-Q:
OK
Changing Grips*
Hold the grip and pull the tab.
Use pliers if necessary.
Tabs
New Grip
Replace the soft foam grips easily using slip-on tabs.
Note:
Choose the correct grip depending on your
handle model.
1. Inserting Tabs
2. Inserting Grip
3. Removing Tabs
The sealing plug prevents undesirable flux vapors or particles from entering the tool. Its usage is
highly recommended for intensive applications when soldering is exposed to FOD environments or
for applications where the soldering iron works close to a vertical position.
Replacing Sealing Plugs
Note:
Choose the correct sealing plug depending on your
handle model.
Before replacing the sealing plug, unplug the power
supply and make sure the device is not hot.
Note:
The chamfered side has
to be positioned towards the
handle.
2. Mounting Position
3. Inserting Sealing Plug
1. Removing Sealing Plug
Sealing
Plug
Handle
Push the sealing plug inside
the handle until the sealing
plug and handle edges are
aligned.
Enter a small shaft or screw-
driver, not deeper than 8mm,
and lift and pull the sealing
plug. Never use a cartridge to
do this operation.
Push the grip with the tabs
onto the handle.
Handles
Green grips
Blue grips
Black grips
T210, T210P, T210N
T8658
T3310
T3311
T245, T245G, T245P
T6057
T1528
T1530
Handles
Sealing Plug
T210
OB1000
T245, T470
OB2000
* not included, sold separately
Put the slide-on tabs into the
new grip.
6
