jbc CDEB Series, Инструкция по эксплуатации

Страница: 16 / 24

The sleep temperatures are
set to achieve a balance
between preventing oxidation
and reaching the working
temperature in a few seconds.
Sleep Delay
Set the time that the tool
will remain at the selected
temperature when in the stand
before entering sleep mode.
The tip temperature will then
drop to the Sleep temperature.
Because our tools reach the
working temperature from the
deafult Sleep mode in only a
few seconds, this parameter is
preset to 0 min. Once the tool
is returned to the stand the
temperature will automatically
drop to the sleep temperature,
extending tip life and avoiding
oxidation. Retinning the tip
before placing the tool in the
stand will protect the tip and
extend its life.
Recommendations Parameter Description
Tool Settings
Setting these
parameters to higher values
will unnecessarily accelerate
oxidation and shorten tip life
especially when working.
Sleep Temp
This is the set temperature the
tip reaches when returned to
the stand.
Hibernation Delay
Set the time the tool will
remain at Sleep temperature
before entering the Hibernation
mode. At this time, the power
supply is cut off and the tip
remains at room temperature.
Increasing the default
value will accelerate
oxidation and shorten the
tip life.
This function completely
protects the tip from oxidation
during long periods of
inactivity while the tool is in the
stand.
Retinning the tip before
placing the tool in the stand
also helps prevent oxidation
and extends the life of the tip.
Peripherals
Link connected peripherals
Temp Level Set
The user can set up to 3 diffe-
rent temperatures. Switch between 3 different
leves by just one “click”. Set
them according to the allowed
values for your soldering
applications.
Warnings
16