WARRANTY
JBC’s 2 years warranty guarantees this equipment against all manufacturing defects, covering the replacement of defective parts and
all necessary labour. Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased enclosing this
fully completed form.
SERIAL Nº
DATE OF PURCHASE
STAMP OF DEALER
press SELECT key 2
seconds to enter Menu
DEFAULT PIN: 0105
SELECT
CHANGE STATION
PARAMETERS S
Language?
ENGLISH S
Tool Select
T245/T210 S
Total Hours
00000 S
Temperature Unit
CELSIUS/FAHRENHEIT
S
Fix Temp. Levels
OFF/ON S
Work Hours
00000 S
Max. T= [400
o
C] S
Min. T= 200
o
C
Sleep Dealy Time
0 MINUTES S
Sleep Hours
00000 S
Max. T= 400
o
C
Min. T= [ 200
o
C] S
Power Limit
130W S
Popup
ENABLED/DISABLED S
Sleep Temperat.
220
o
C/
o
F S
Hibern. Hours
00000 S
Change PIN
YES/NO
Hibernation
30 MINUTES S
Sleep Cycles
00000 S
Temperat. Adjust
+/- 0
o
C/
o
F S
Save Changes?
NO YES
Save Changes?
NO YES
CHANGE TOOL
PARAMETERS S
COUNTERS READ
S
RESET PARAMETERS
S
EXIT SETUP
S
MENU SETTINGS
0008802-0610
4
TECHNICAL SPECIFICATIONS
- Temperature selection from 90 to 450°C (±5%).
- Power: 75W.
- Safety transformer, mains separator and double isolation, with temperature protection fuse.
-
BD-2BA / BD-2SA
230V control unit. Input: 230V 50Hz. Output: 24V.
-
BD-1BA / BD-1SA
120V control unit. Input: 120V 60Hz. Output: 24V.
- Total weight of unit: 2,6 Kg.
- Complies with CE standards on electrical safety, electromagnetic compatibility and ESD protected housing
“skin effect”.
- RoHS compliant.
- Equipotential connector and the tool tip are connected to station mains ground supply for ESD protection.
This product should not be
thrown in the garbage.
