jbc AL-2A, Руководство пользователя

Страница: 4 / 11

-
+
LOADING
SOLDER WIRE
+
-
www.jbctools.com
6 7
A
B
5.
Connect the handpiece to the station and switch it on. With the handpiece out of the stand, press
the WIRE LOAD key till the solder leaves by the end of the guide tube.
Fast wire
dragging
Solder wire dragging button
A.
Adjust the dragging strength
to allow the forwarding of the
solder wire and to avoid stall
and or clogging situations when
any cause arises
B.
Tighten the dragging
mechanism
Clutch Regulation
Control Screen
There are 4 tool status:
USE (Use). The tool is ready to work.
STD (Stand). The tool is placed in the stand but still not in the sleep mode.
SLP (Sleep). The tool is in the sleep mode in the stand, its temperature has dropped till the sleep temperature.
OL . The power circuit is overheated. The power is temporarily not supplied.
TEMP. 230ºC USE
disc. L 10 S 11
Tool temperature
Tool status
Length of
wire Speed Working method