jbc AL-1A, Справочное руководство

Страница: 8 / 28

ENGLISH
6
SLEEP FUNCTION
Tool in sleep mode
As son as the soldering iron is left on the stand,
the tip's temperature automatically drops to the
sleep temperature. This is possible because of its
extremely fast thermal response, which allows to
reach the working temperature from the sleep one
without interruption. The oxidation rates on the tin
coating of the tip are drastically reduced, which
increases the tip's lifespan from 2 to 3 times.
To indicate that the tool is in sleep-mode, the display
will show the text SLP .
TEMP. 230ºC SLP
disc. L 10 S 11
HIBERNATION MODE
It is only a "Sleep" second what makes the station
to be in hibernation status, that is to say, the station
keeps runnning but without heating their tools.
It is an state of minimum consumption, but when
it detects that we are using a tool, it turns out
operatively again.
The timing of the hiberation mode is independent
from the sleep mode. It activates by default after
30 minutes.
The hibernation function parameters can be
modified.
In order to take full advantage of the sleep
function and as a security measure, it is
necessary to place the tool in the stand when it
is not being used.
If you would like to change the SLEEP and
HIBERNATION parameters, as any other function,
see page 22.
The sleep function parameters can be modified
using the station program.