JBA-CB301 INSTRUCTIONS 200S TANK V1.0 www.jbaf.com.au
2
1.
PREPARING THE TANK AND BRACKET
STEP 1.1
USING A 5MM ALLEN KEY, LOOSEN
OFF THE GRUB SCREW ON EACH TANK FOOT
AND SLIDE OFF THE TANK.
STEP 1.2
ROTATE THE TANK SO THAT THE
DRAIN SCREW IS 90 DEGREES FACING YOU AS
SHOWN. SLIDE THE TANK FEET BACK ON TOP
FACE (ALONG TJM STICKER)
STEP 1.3
ALIGN THE RIGHT SIDE FEET LEVEL
WITH THE END OF THE TANK AS SHOWN AND
TIGHTEN.
STEP 1.4
POSITION THE LEFT SIDE FEET 280MM
(CENTRE TO CENTRE) FROM THE RIGHT FEET
AND TIGHTEN.
STEP 1.5
INSTALL JBA-CB106 90 DEGREE ELBOW
ON THE END OF THE TANK AS SHOWN FACING
TOWARDS THE TANK FEET.
STEP 1.6
INSTALL SECOND JBA-CB106 90
DEGREE ELBOW IN THE LHS ¼” BSP OUTLET ON
THE TANK AS SHOWN FACING TOWARDS THE
RHS.
280MM
