5
JB INDUSTRIES
• DV-22N Operating Manual • 630.851.9444 • [email protected]
MENU SETTINGS
Accessing Main Menu and Sub Menu Settings
1. Press and hold ENTER button for three seconds to access main menu settings.
2. Press ENTER button to cycle through all main menu options. Available main menu options:
•
“UNIT”
•
“LO--AL”
•
“B-LITE”
•
“BEEP”
•
“HI RES”
•
“AU-OFF”
3. To select a main menu option, press and hold the ENTER button for three seconds. You are now in the sub
menu of your selection. Press the ENTER button to cycle through the sub menu options.
4. To select a sub menu option, press and hold the ENTER button for three seconds to store the selection. Unit
will display “STORED” and save your selection. Each time the DV-22N powers on, stored user settings will
be retrieved.
5. To exit the sub menu, press the POWER button once to return to the main menu.
6. To exit the main menu and return to normal operation mode, press the POWER button again.
Note: When scrolling through menu settings, the POWER button acts as the cancel/exit button.
Unit Selection (UNIT)
The available unit selections are: Microns, PSIA, inHg, Pascals, Torr, mTorr and mBar.
Factory default setting is “MICRONS”.
When the UNIT menu is active, a constant pressure value equivalent to 1000 microns is displayed using the
currently selected units (e.g.: 133.31 for Pascals). The current unit selection is shown at the top of the screen.
1. Press the ENTER button to scroll through available options.
2. To select and store an alternate option as a new setting, press and hold the ENTER button for three seconds
on the selected option. Unit will display “STORED” and save your selection.
3. Press POWER button once to cancel and return to main menu. Press POWER button twice to exit and return
to normal operation mode.
