JB Systems PARTY SPOT, Инструкции по эксплуатации, Страница: 7 / 12

ENGLISH USER MANUAL
JB SYSTEMS
®
5/7 PARTY SPOT
DMX
Channel Mode
The unit has 4 different DMX channel modes. With this function you can choose the DMX mode you
want to use.

Press the MENU button until 4ch, LC02, 6ch or 8ch is shown on the display.

Use the DOWN and UP buttons if you would like to change the DMX channel mode

Press the ENTER button to confirm
AUTOMATIC CHASE MODE [CC]:
Used to set the automatic Chase Mode so colors will change automatically at a constant speed.

Press the MENU button until CC.. (CC followed by 2 numbers) is shown on the display.

Use the DOWN and UP buttons to set the speed of the effect. (00=slow, 99=fast).

Press the ENTER button to confirm
AUTOMATIC FADE MODE [CF]:
Used to set the automatic Color Fade Mode. Colors will smoothly fade-over into each other at a
constant speed.

Press the MENU button until CF.. (CF followed by 2 numbers) is shown on the display.

Use the DOWN and UP buttons to set the speed of the effect. (00=slow, 99=fast).

Press the ENTER button to confirm
AUTOMATIC PULSE MODE [CG]:
Used to set the automatic Pulse Mode so each color will fade in, then fade out at a constant speed.

Press the MENU button until CG.. (CG followed by 2 numbers) is shown on the display.

Use the DOWN and UP buttons to set the speed of the effect. (00=slow, 99=fast).

Press the ENTER button to confirm
AUTOMATIC SOUND MODE [SoUn]
Used to select the automatic Sound Mode so colors will change automatically to the sound of the
music.

Press the MENU button until [ SoUn] is shown on the display.

Press the ENTER button to confirm.
DISPLAY ON/OFF:
Used to select if the display should go out when not in use or if it should be always lit.

Press the MENU button until [ -on-] or [-oFF] is shown on the display.

Use the DOWN and UP buttons to select
o
[-on-] : display always lit
o
[-o
FF] : when you don’t navigate in the menu, the display goes off after a couple of seconds

Press the ENTER button to confirm
STATIC COLOR MODE:
Used to set a static color for the projector.

Set the 4 basic colors (red-green-blue-white) manually to compose precisely the exact color you
need:

Press the [MENU]
button until r… (r followed by 3 numbers) is shown on the display

Use [DOWN] and [UP] buttons to change the intensity of the Red color (000=minimum,
255=maximum).

Press [ENTER] to confirm

Press the [MENU] button until G
… (G followed by 3 numbers) is shown on the display

Use [DOWN] and [UP] buttons to change the intensity of the Green color (000=minimum,
255=maximum).

Press [ENTER] to confirm

Press the [MENU] button until b
… (b followed by 3 numbers) is shown on the display

Use [DOWN] and [UP] buttons to change the intensity of the Blue color (000=minimum,
255=maximum).

Press [ENTER] to confirm

Press the [MENU] button until o
… (o followed by 3 numbers) is shown on the display

Use [DOWN] and [UP] buttons to change the intensity of the White color (000=minimum,
255=maximum).

Press [ENTER] to confirm