ENGLISH
USER MANUAL
JB SYSTEMS
®
7/9
MULTIBEAM LASER
4) DMX MODE:
The laser can be controlled by any standard DMX-controller in 2 different DMX-modes:
•
2 CHANNEL MODE:
for extremely easy setup and use! (display shows “2-h”)
•
10 CHANNEL MODE:
for full control of all possibilities. (display shows “10h”)
•
Connect the DMX input of the laser to the DMX output of the previous unit in the chain or directly to the
DMX-output of your controller.
•
Press the [MENU] button to select the desired DMX-mode. (2-h or 10h)
•
Press the [ENTER]-button to confirm your choice.
•
Press the [UP / DOWN] buttons to choose the desired DMX-address (from 001 to 503 (10h) or 001 to
511 (2-h))
•
Press the [ENTER]-button to confirm your choice.
Please refer to the DMX-chart below for the functions of the different channels.
Some more information on DMX512:
The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to
“daisy chain” your DMX controller and all the connected light effects with a good quality XLR M/F
balanced cable. To prevent strange behavior of the light effects, due to
interferences, you must use a 90Ω to 120Ω terminator at the end of the chain. Never
use Y-splitter cables, this simply won’t work!
Each effect in the chain needs to have its proper starting address so it knows which
commands from the controller it has to decode.
2 channel DMX MODE:
CHANNEL
VALUE
FUNCTION
CH 1
000
‐
015
Blackout
016
‐
035
Program 1
036
‐
055
Program 2
056
‐
075
Program 3
076
‐
095
Program 4
096
‐
115
Program 5
116
‐
135
Program 6
136
‐
155
Program 7
156
‐
175
Program 8
176
‐
195
Program 9
196
‐
215
Program 10
216
‐
235
Program 11
236
‐
255
Program 12
CH 2
000
‐
200
Program speed
201
‐
255
Programs will run sound activated