ENGLISH
OPERATION MANUAL
JB SYSTEMS®
3/51
MINI LED MANAGER
FUNCTIONS
1. INTERNAL MICRO:
used for sound activated
chases.
2. DMX INPUT:
3pin male XLR-connector used to
connect
universal
DMX-cables.
This
input
receives instructions from a DMX-controller or
from another Mini Led Manager when used in
master/slave mode.
3. DMX OUTPUT:
3pin female XLR-connector used
to connect the Mini Led Manager with the next
DMX appliance in the chain or with another Mini
Led Manager when used in master/slave mode.
The mini LED Manager can also be used as
controller for other LED projectors like for example
“LED PAR56/64”
4. ON/OFF SWITCH:
used to switch the unit on/off.
5. DIP SWITCHES:
when used in DMX mode
(DIP10 = OFF) you can set the DMX-starting
address of the unit.
When used in stand-alone
mode (master, DIP10 = ON), you can use the
DIP-switches to set different pre-programmed
options.
6. AUTO DMX ADDRESS BUTTON:
see further to learn how to set the DMX address easily.
7. OUTPUT CABLE:
used to connect different 24Vdc common anode LED projectors. (max. load: 100W)
The cable uses a special 4pin female connector. You can use the supplied conversion cable to easily
connect different projectors.
8. OUTPUT MONITOR:
you can check the separate output state of the 3 colors (red, green and blue)
9. ANALOG SWITCH INPUT:
used to connect any external analog switch. This external switch can be
used to switch the general output of the Mini LED Manager on/off. (external blackout)
See further for
more information on how to connect the analog switch.
10. MAINS INPUT:
with IEC socket and integrated fuse holder, connect the supplied mains cable here.
11. MAINS FUSE:
Always replace this fuse with a fuse that has the same characteristics! (250V/3,15A)
DIP SWITCH SETTINGS
Dip switch 10:
Dipswitch setting
Function
DIP10 = OFF
DMX / Slave operation
You can use the automatic DMX addressing feature (see further) or traditional DIP-switches.
Use the dipswitches 1~9 to set the DMX address from 0 to 511.
The first 9 DIP-switches correspond to a certain DMX-value:
DIP
#1
#2
#3
#4
#5
#6
#7
#8
#9
Value
1
2
4
8
16
32
64
128
256
You can combine the values of these switches to obtain any starting address between 1 and
512:
Begin address = 01
switch 1=ON
values: 1
Begin address = 05
switch 1+3=ON
values: 1+4 = 5
Begin address = 09
switch 1+4=ON
values: 1+8 = 9
Begin address = 13
switch 1+3+4=ON
values: 1+4+8 = 13
…
Begin address = 62
switch 2+3+4+5+6=ON
values: 2+4+8+16+32 = 62
DIP10 = ON
Master operation (stand-alone)
Use the dipswitches 1~9 to set the mode, speed, patterns, fixed color color…etc functions.
Below each of these functions is explained in detail.
ENGLISH
OPERATION MANUAL
JB SYSTEMS®
4/51
MINI LED MANAGER
Dip switches 1&2: Mode (Sound/auto/fade/fixed color):
Dipswitch setting
MODE
SOUND
: internal microphone triggers the selected patterns.
AUTO
: the selected pattern runs automatically at the desired speed.
FADE
: the colors of the selected pattern fade smoothly at the desired speed.
FIXED COLOR
: use DIP-switches 6, 7, 8 & 9 to select the desired colors.
Dip switches 3,4 & 5:Speed (from fast to slow):
Dipswitch setting
Auto/FadeMode
Speed 1
Fast
Speed 2
Speed 3
Speed 4
Speed 5
Speed 6
Speed 7
Speed 8
Slow
DIP switches 6,7 ,8 & 9: Chase & Color:
Dipswitch setting
SOUND & AUTO MODE
FIXED COLOR MODE
Standard chase
White
Bright chase
Red
Mood chase
Orange
Spectrum random chase
Amber
Spectrum sequence chase
Yellow
Dynamic chase
Light Yellow
Chase Red – Cyan
Apple Green
Chase Green – Purple
Light Green
Chase Blue – Red
Green
Chase Yellow – Blue
Cyan
Chase Red – Green
Blue
Chase Yellow – Green
Deep Blue
Chase Cyan – Orange
Purple
Chase Green - Light purple
Light Purple
Chase Red – Yellow
Magenta
Chase Gold Yellow - Blue
Pink