JB Systems LIVE-6, Руководство по эксплуатации, Страница: 9 / 12

ENGLISH USER MANUAL
JB SYSTEMS 7/7 LIVE-6 / LIVE-10
29. [SEND]: . The amount of signal of each individual input channel that should be routed to this output can be
set by using the orange FX/SEND buttons (10). As the signal is post fader, the level is also influenced by
the channel fader/knob
30. [PHONES] output: connect your headphones here
31. [PHONES/CTRL ROOM] knob: adjusts the output level of the headphones output and the control room
output.
32. USB [POWER] connector: this input can ONLY be used to power the unit via an USB power adapter of
DC 5V of 1A or more.
Note: the unit can also be powered via the USB connector on the front of the unit (24). When the unit is
already powered, for example by via a computer, this power input should not be used.
CLEANING THE MIXER:
Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not use
volatile liquids such as benzene or thinner which will damage the unit.
SPECIFICATIONS
This unit is radio-interference suppressed. This appliance meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
Power Supply: DC 5V-1A
Power Consumption: Live-6 = 5W, Live-10 = 9W
Frequency response: 20-20.000Hz (
±
1dB+4dB
μ
@1KHz)
THD: <0.5%
USB connections: USB 2.0
Media Player Formats: WMA, WAV, FLAC, APE, MP3
Channel tone controls:
High:
+15dB / -15dB @ 12kHz
Mid: +15dB / -15dB @ 2.5kHz
(Freq adjustment from 250Hz to 5kHz)
Low: +15dB / -15dB @ 80Hz
Dimensions: Live-6 = 250(W) x 275(D) x 60(H) mm
Live-10 = 415(W) x 275(D) x 60(H) mm
Weight: Live-6= 1,8kg, Live-10= 3kg
The information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.jb-systems.eu