ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
3/5
EZ-SPOT15 WW OUTDOOR
DESCRIPTION:
1. IR-RECEIVER:
receives the commands from the IR-4 remote.
2. LENS:
10° lens in front of the 15W WW LED.
3. KNOB:
used to fasten the hanging bracket from the projector. There is a knob on the left and right side of
the projector.
4. HANGING BRACKET:
with a knob on both sides to fasten the projector in the desired position. You can
use the holes in the bracket to fix a hook or truss clamp.
5. MAINS CABLE:
fixed mains cable with schuko plug.
6. VALVE:
serves to drain water or condensation.
IR-4 REMOTE
1. [OFF]-button:
this button has 2 functions.
•
used to switch off the output of the projector.
•
By pressing this button for 3s the IR-4 remote control will be turned
off (the 15W led will flash 2 times).
2. [UP]-button:
this button is used to increase the light output of the projector.
3. [DOWN]-button:
this button is used to decrease the light output of the
projector.
4. [ON]-button:
this button has 2 functions.
•
used to switch on the output of the projector.
•
By pressing this button for 3s the IR-4 remote control will be turned
on (the 15W led will flash 2 times).
5. Battery compartment:
receives a CR2025 3V-battery (supplied).
