JB Systems CMX 24, Руководство по эксплуатации

Страница: 11 / 49

ENGLISH OPERATION MANUAL
JB SYSTEMS ® 17/93 CMX24

To increase the intensity of the channels:
o
Press and hold the <UP/CHASE REV> button
o
Press and hold the <PRESET A x> button for channels 1 to 12. Use the <PRESET B x>
button for channels 13 to 24.
o
You will see that the intensity will slowly increase on your display (and your fixtures)
o Release the buttons as soon as you have reached the desired intensity.

To decrease the intensity of the channels:
o
Press and hold the <DOWN/BEAT REV> button
o
Press and hold the <PRESET A x> button for channels 1 to 12. Use the <PRESET B x>
button for channels 13 to 24.
o
You will see that the intensity will slowly derease on your display (and your fixtures)
o
Release the buttons as soon as you have reached the desired intensity.

Repeat these steps till you have the desired settings

To exit the edit mode:
o
Press and hold the <RECORD/SHIFT> button
o
Press and release the <KILL/REC EXIT> button
o
Release the <RECORD/SHIFT> button
o
The normal output of the controller is shown again
!! The modifications will be stored directly; there is no possibility to undo the modifications.
B. Add scenes:
This method gives you the possibility to add a new scène to the chase. Repeat this method to add several
scenes.

Be sure that the program mode is activated.

Be sure that Chase/Scenes is activated.

Bring all the Preset B faders to their lowest position

Clear the working memory:
o
Press and hold the <RECORD/SHIFT> button
o
Press and release the <PAGINA/REC CLEAR> button
o
Release the <RECORD/SHIFT> button

Set the new scene, so that it appears on the green leds (and fixtures), eventually in Single
Preset mode to be able to use 24 channels

Press and hold the <RECORD/SHIFT> button. The scene is now recorded in the working
memory

If you have activated the Single Preset mode to compose scenes, you have now to activate
again the Chase/Scenes mode.

Bring all the Preset A and B faders to their lowest position

Choose the desired page by using the <PAGINA/REC CLEAR> button

Place the Preset B x fader in edit mode
o
Press and hold the <EDIT/ALL REV> button
o
Press and release the <PRESET B x> button
o
Release the <EDIT/ALL REV> button
o
The yellow Led above the Preset B fader will lit and the actual scène is shown.

Press the <STEP> till you have reached the scene that should come NEXT to the scene that you
want to insert.

Press and release the <INSERT/0% OR 0-255> button.

To exit the edit mode:
o
Press and hold the <RECORD/SHIFT> button
o
Press and release the <KILL/REC EXIT> button
o
Release the <RECORD/SHIFT> button
o
The normal output of the controller is shown again
C. Delete scenes:
!! It is inpossible to recover deleted scenes.

Be sure that the program mode is activated.

Be sure that Chase/Scenes is activated.

Move all the Preset A faders to their lowest position

Choose the desired page by using the <PAGINA/REC CLEAR> button
ENGLISH OPERATION MANUAL
JB SYSTEMS ® 18/93 CMX24

Place the Preset B x fader in edit mode:
o
Press and hold the <EDIT/ALL REV> button
o
Press and release the <PRESET B x> button
o
Release the <EDIT/ALL REV> button
o
The yellow Led on top of the de Preset B will Lit and the actual scene is shown.

Select the scene that you want to delete by using the <STEP> button.

Press and release the <DELETE/REV ONE> button

If needed, choose another scene by using the <STEP> button en delete it by using the
<DELETE/REV ONE> button

To exit the edit mode:
o
Press and hold the <RECORD/SHIFT> button
o
Press and release the <KILL/REC EXIT> button
o
Release the <RECORD/SHIFT> button
o
The normal output of the controller is shown again

Empty a preset B fader

!! it will not be possible to undo this action !!

Be sure that the program mode is activated.

Press and hold the <RECORD/SHIFT> button

Press and release the <PRESET B x> button of the desired preset B fader

Press and release the <PRESET B x> button of the desired preset B fader

(So the preset B x button has to be pressed 2 times).

Release the <RECORD/SHIFT> button

Copy Preset B fader
!! Only possible with scenes!!
If you want to copy a scene to another preset B fader to use again the same scène or to use it as a base for
a new scene.

Be sure that the Chase/Scene mode is activated

Bring all the preset A faders (or the master A fader) to their lowest position

Bring all the preset B faders to their lowest position

Bring the Master B fader to its lowest position (100%)

Modify the page if necessary

Move the preset B fader of the scene that you want to copy to 100%

<RECORD/SHIFT> + <PAGINA/REC CLEAR> to delete the working memory

<RECORD/SHIFT> to store the scene

Modify the page if necessary

<RECORD/SHIFT> + <PRESET B x> to store the scene in another preset B fader, the scene is
now copied

Delete a CHASE
To delete a chase or a scene from a preset B fader in Chase/Scenes mode:

Use the <PAGINA/REC CLEAR> button to select the page

Press and hold the <RECORD/SHIFT> button

Press and release the <PRESET B x > button

Press and release the <PRESET B x> button again

Release the <RECORD/SHIFT> button

Blind/Home
In Chase/Scenes mode u can use the <Blind> and the <Home> buttons. These buttons are not used in
Single Preset and Double Preset mode.

Preset A
To disconnect the channels 1 to 12 from the preset B scenes/chases:
o
Press and hold the <BLIND> button
o
Press and release the <Preset A x> button
o
Release the <BLIND> button
The level will only be determinated by using the preset A fader, master A fader and the flash buttons.