C2 Series
2
ENGLISH
1. Main Features
The PS series amplifiers are high quality and performance amplifiers. To get the maximum
result, it features a servo system, power supply and a fan with adjusted speed.
The main features include:
•
XLR and 1/4’ jack balanced input
•
Input sensitivity switch
•
Output: Speacon and speaker terminals
•
Stereo, bridge and parallel switch
•
Soft start
•
Perfect protection system for the speakers
•
Thermal cut off (85°C protection)
•
Current limiter
2. Precautions
•
Use an adequate power source.
•
Do not turn on several amplifiers at the same time.
•
Do not allow that the ventilation holes in the front or in the back of the amplifier are
blocked in any way.
•
Input level controls are present on each channel.
•
Output can use speacon or binding posts.
•
Please check carefully if the mode switch is in the correct position: stereo,
bridge or parallel.
•
Clean the amplifier regularly. Especially the dustfilters located behind the front panel
should be cleaned regularly.
•
Use a vacuumcleaner to remove dust inside the amplifier. Never use water.
•
In case of a defect, contact your dealer.
