ENGLISH
USER MANUAL
JB SYSTEMS®
7/15
ALIEN
o
[AutL] = Laser effects [AL 1] to [AL 6]
o
[AutF] = White Flash effects [AF 1] to [AF 8]
o
[AutM] = Mixed effect [AM 1] to [AM 8]
•
With the [UP] & [DOWN] buttons, you can choose different programs for the selected sound mode. (see
above)
•
Press the [ENTER] button to confirm your choice.
•
Now use the [UP] or [DOWN] buttons to select the speed:
o
S 1 = Fastest speed
o
S 100 = Slowest speed
•
Press the [ENTER] button to confirm your choice.
You can connect several units together: just put the first unit of the chain in one of the automatic effect
modes and all other units in “Slave mode” (display shows “SLA”) to make them all work in perfect sync!
3)
SLAVE MODE:
The unit follows the instructions given by the first unit (master) in the chain. Like this you can obtain nice
synchronized shows.
•
Connect the DMX input of the unit to the DMX output of the previous unit in the chain.
•
Press the
FUNC-button until the display shows [SLA]
•
Press the ENTER-button to confirm your choice.
You can connect several units together. Please put the firs
t unit of the chain in “Music or automatic mode”
and all other units in “Slave mode” to make them all work in perfect sync!
4) DMX512 MODE:
The laser can be controlled by any standard DMX-controller in 4 different DMX-modes.
•
Press the [MENU] button until the display shows [dMX]
•
Press the [ENTER] button
•
The display will show the actual DMX address
•
Press [ENTER] to enter the setup
•
Use the [UP] or [DOWN] buttons to select the DMX mode you want to use. [3Ch], [9Ch], [11Ch] or
[28Ch]
•
Press the [ENTER] button to confirm your choice.
•
Use the [UP] or [DOWN] buttons to select the desired DMX address
•
Press the [ENTER] button to confirm the DMX address
Note:
the display blinks when the unit is in DMX-mode and no DMX-signal is detected.
