jb media Light-Manager Mini, Руководство по эксплуатации

Страница: 8 / 10

15
The red LED is flashed for a short moment and the remote control should have
learned the code. This procedure is repeated for all keys configured.
Note : If the remote control does not seem to learn the code successfully change the
duration of the infrared transmission. This is done by the options menu with the item
Remote control -> Duration for learning . For most remote controls the medium
adjustment is recommended.
When the teaching process is finished you can check the remote control codes. This is
done by the options menu item R emote control .
If you press a button on the remote control you will see the corresponding number on
the display. A green bar reflects the intensity of the transmission. The red LED of the
16
Light-Manager flashes accordingly to the signal received. This is useful to check if any
infrared signal can be received at all.
Hexcode Table
The hexcode table can be opened by the options menu. It contains the infrared codes
of all keys configured in the hexadecimal Philips Pronto format. These hexcodes can
be processed by several remote controls like the Philips Pronto or the Nevo SL. For
these remote controls it is not necessary to perform manual learning.
It is known that the learning capability of Logitech Harmony remote controls fails on
certain PCs. This can be caused by an unstable voltage on the USB bus among other
things. In such a case you can email the hexcode table to the Logitech support
department. They will integrate these codes into your personal profile.
Web-Interface
The Lightman Studio software contains a simple but powerful web server. It enables
you to control your lightning by a web interface. To do that you can create your own
html files which have to be placed in the \html subfolder of the Lightman Studio
program folder. Before you can use the web interface the server has to be enabled.
This is done by the options menu with the item Webserver active . The port the
server listens to can also be selected by the options menu. If the port is in use by
another application already an error message appears.
The control of light scenes is realized by hyperlinks with the extension ?key=n . The
letter n is a placeholder for the number of the key respectively the light scene you
want to trigger through the hyperlink. So the link
<a href=“empty.htm?key=3“>Light Scene 3</a>