JB-Lighting Varyscan 6 HMI 575 Скачать руководство пользователя страница 7

Страница: 7 / 14

Varyscan 6 HMI 575

- 7 -

Definition of the menu / projector-setup

Read off the working hours of the lamp or of the projector:

After you press the key menu you will see in the display the first point of menu; the time for the working hours of the lamp
(time 2). Would you like to reset this time you have to press at the same time the key + and -. The counter will be reset.
With the key enter you will come to the next point of menu, the working hours of the projector (time 2). You cannot reset
this time.

Selection DMX-Mode / Standalone Mode :

Press the key menu to change into the setup mode of the projector. Now press the key enter until DMX-mode or
standalone-mode appears on the display. Now you can chose with the keys -/+ the desired mode and confirm it with the
key enter. According to your selection the menu-structure changes. The menu-system is divided in two ranges.

DMX-Mode

Adjustment of the DMX-address:

Press the key menu to change into the setup-mode of the projector. Now press
the key enter until the selection DMX-mode / standalone-mode appears on the
display. Confirm the DMX-mode with the key enter. Now you see on the display
the request to give in the address. Therefore you use the keys + and -. If you
press this key longer, the addresses will faster count up or down. If you have
adjust your desired address, confirm it with the key enter and leave the menu with
the key menu. Your Varyscan

6 575 HMI needs 12 channels (16bit-mode).

Therefore you must adjust the channels of your projector with a distance of 12.
Adjust the addresses according to the following schedule:

Reset on DMX:

If you would like to reset your Varyscan

from your DMX-desk (reset on DMX), turn the function DMX-reset to on.

Therefore change into the setup menu of the projector (DMX-mode). In the DMX-mode range press the key enter until
DMX-reset on/off appears on the display. To activate this function press the key +, to deactivate the key -. Afterwards
confirm your application with the key enter. Now you have the possibility to replace your Varyscan

if you transmit with

your DMX-desk on the gobo-channel (gobo-channel 3) the DMX-amount 255.

Continuously colour changing:

If this function is turned on, each DMX-amount between 0 and 128 correspond to a colour wheel position. So you cannot
only produce half colours but also 1/3 – 2/3 colours or ¼ - ¾ colours. To choose this function, choose in the menu range
DMX-mode of your Varyscan

6 575 HMI with the key enter the option colour and turn it with the key + and – to on and

confirm it with enter.

Pan normal/invers:

With this function you can invert the moving direction of the x-motors. If your projector moves with ascending DMX-
amounts on the right side, so the projector moves with ascending DMX-amounts on the left side, if you turn the function
pan on invers. For the selection of this function change into the setup mode of the projector –range DMX-mode – and
confirm it with the key enter until the function pan appears. Now you can change with the keys + and – between normal
and invers classes of rating.

Tilt normal/invers:

With this function you can invert the moving direction of the y-motor. If your projector moves with ascending DMX-
amounts upwards, so the projector moves with ascending DMX-amounts downwards, if you turn the function tilt to invers.
For the selection of this function change into the setup menu of the projector – range DMX-mode – and confirm it with the
key enter until the function tilt appears. Now you can change with the keys + and – between normal and invers classes of
rating.

projector-number DMX-address
1