lamp
nipple
knurl nut
21
JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein T49 (0)7304-9617-0
With the nipple of the lamp facing the back insert the
lamp into the socket. Push the lamp forward to the maximum.
Tighten the knurl nut to fix the lamp.
.
When changing the lamp, remove old lamp from
lamp socket. Hold the new lamp only by its
metal base. Never touch the glass bulb.
Insert the new lamp in the lamp socket.
2.1 Installing or changing the lamp
WARNING: Disconnect fixture from mains, and allow
hot lamp to cool down for at least 30 minutes!
2. Installation
Position head in horizontal position. Hinge no. 1 must be on the
upper side of the head. Turn screws no. 5 1/2 turn left and remove
plastic lid.
.
Loosen knurled head screw no. 3 and open the lampcover
Light source: OSRAM HMI 575 GS
Install a 3-prong gounding type plug that fits your supply
Connected load: voltage 115/230V, frequency 47-63Hz
WARNING: To ensure propper installation of the plug consult a qualified
technician!
2.2 Powering the fixture
brown
live
“L”
blue
neutral
“N”
yellow/green gound
1
2
3
electronic ballast
