JAZZ AUDIO SOUND PLATFORM IR REMOTE CONTROL
1. POWER -
Press this button to turn the SOUND PLATFORM ON/OFF
.
2. INPUT -
Press to select a connected source. The SOUND PLATFORM Front Panel Status LED will flash once to
indicate a change in input selection.
COAX -
Press to select the Digital Coaxial Input.
OPT
- Press to select the Digital Optical Input.
AUX -
Press to select the L&R Line Level Audio Input
Press to select a paired Bluetooth device. A Bluetooth device must be paired to the JAZZ AUDIO SOUND PLATFORM
for audio output. A paired Bluetooth device will remain ‘connected’ after changing inputs as long as the Bluetooth device
has not moved out of range, turned off or otherwise disconnected.
3. Press this button to initiate Bluetooth pairing mode.
The Front Panel Status LED will rapid flash blue. The
SOUND PLATFORM will output a pairing code that will be picked up by any active Bluetooth device that is within range
of the SOUND PLATFORM.
4. VOLUME -/+ Press VOL -
to reduce volume. Press VOL + to increase volume.
5. MUTE -
Press this button once to mute the SOUND PLATFORM. Press again to un-mute the SOUND PLATFORM.
6. SURR -
Press this button to activate the simulated surround audio mode. Press again to turn Surround Mode OFF.
7. EQ RESET -
Press this button to cancel any changes to the Treble and Bass controls. Remote Control Battery
Replacement CAUTION: When replacing the lithium battery in the remote, make sure that the replacement battery is
inserted in correct polarity. Place the battery so that its positive (+) side faces up with the tray held so that the surface
with the dot and (+) is facing up
.
8. BASS -/+ Press BASS -
to reduce low frequency output. Press BASS + to increase low frequency output.
9. TREBLE -/+ Press TREBLE -
to reduce high frequency output. Press to increase high frequency output.
