8
9
Connecting the wireless subwoofer
The subwoofer is preset at the factory and should link with the sound bar
automatically when both main bar and subwoofer are turned on. If the LED indicator
on the back keep flashing red/green light, when the main bar is turned on and has
music/source input, please set the subwoofer by following procedures below.
1
.
Plug the power cords of the main unit and subwoofer
into an AC wall outlet.
2
.
Press the power switch to “on” on the back of the
subwoofer . Press the power button on the main bar.
3.Press the SYNCH button on the back of the sound bar.
The green LED will blink quickly.
4.When the pairing is finished, the LED indicator on
your subwoofer will turn to solid green.
!
If there has no music input for a while, the subwoofer will
enter STANDBY mode, and the LED indicator will
flash
red and green slowly. In this case, you just need
to play
some music and the subwoofer will be active
again.
Listening to TV sound from the sound bar
Control the volume of the unit by
adjusting your sound bar
1 Turn on the soundbar, or make sure
the unit is in standby mode.
2 Turn on the TV.
3 Adjust the volume of the soundbar.
Control the volume of the unit by adjusting the TV volume
If the sound output jack of the TV can be set to “Variable”, the volume of the soundbar
can be changed by adjusting the TV volume. For TV settings, refer to the operating
instruction of the TV.
1 Set the sound output jack of the TV to “Variable”.
2 Adjust the volume of the unit according to the TV
3 Adjust the volume of the soundbar
Press one of the sound field buttons you want to use.
Sound
field
Effect
MOVE
MUSIC
VOICE
The soundbar comes with rubber feet already attached,
so it will sit securely on any flat
surface. Just center the bar
under your TV screen. If your TV is housed in a media center,
you can place the bar above the TV.
If your TV is wall mounted, the bar can mount right beneath
it. The bar has built-in
keyhole slots that make it easy.
Note:
The rubber feet are not detachable and cannot be removed.
Where to Locate Your TV Soundbar
1
2
3
4
Overall Dimensions
1.
8.1 cm
2.
81.5 cm
Selecting the sound field
Suitable for use for a wide range of sources of any type.
Provides dynamic sound and realistic sensation.
Features easy-to-hear dialogue and clear sound.
Keyhole Slots
3.
37 cm
Top of Bar to Keyhole Slots
4.
2.05 cm
●
Install on concrete wall only
●
For the installation, avoid a location with high temperature and humidity, or a wall that
cannot sustain the weight of the set. The place should be safe from hazards such as
water or crushable items.
●
Check the strength of the wall. If the wall is not strong enough to support the unit and the
TV, reinforce the wall or install the unit on different wall that can sustain the total weight.
●
Purchase and use the fixing screws appropriate for the kind of wall you have (plaster
board, iron board, wood, etc.) If possible, fix the support screws into wall studs.
●
Connect cables from the unit to external devices before you install it on the wall.
●
Make sure the unit is turned off and unplugged before you install it. Otherwise, it may
cause an electric shock.
1.Choose the location where you want to mount the sound bar.
2.Fixed screws on the wall. Make sure the distance between two screws is 37cm.
3.Secure the cap on each screw.
4.Hold the sound bar tightly, and place the keyholes near the screws. Make sure the cap
(tip side of the screw) is in the keyhole, and slide the bar down gently.
INSTALLING THE WALL MOUNT
Installation Precautions
Note: Avoid pushing the sound bar toward the screws harshly. It is advised to
complete this step with at least with two people.
If you wall mount your Soundbar, ensure that your wall anchors secure properly into the wall
and that they can bear the weight of the Soundbar, which is 1.88 kg.
