1-PLAYER
ATTACK DISK ADVANTAGE CHART
Fire
Normal
Flying
Fairy
Bug
Rock
Ice
Psychic
Poison
Water
Grass
Electric
Ground
Fighting
Dark
Steel
Dragon
Ghost
Advantage (+1)
Get ready to hone your skills as a Pokémon trainer! In order to
play the Surprise Attack Game, every player needs one
Pokémon Battle Figure, at least 3 attack disks, and 1 Surprise
Attack Poké Ball!
If you want to practice gameplay strategies with your attack
disks, play with the 1 Player Training Rules.
If you’re playing with 2 Players, try the Junior Trainer Rules or
take things to the next level with the Master Trainer Rules.
GAME SUMMARY
GETTING STARTED
4+
A round of gameplay consists of 3 spins.
Training Rules gameplay consists of
1 Round.
Junior Trainer Rules and Master Trainer
Rules gameplay consist of 2 to 3 rounds.
1
Select a Surprise Attack Poké Ball and Pokémon Battle Figure to
use as your own.
2
Select a different Surprise Attack Poké Ball and Pokémon Battle
Figure to train against. This Surprise Attack Poké Ball will be
referred to as the “Training Partner.”
3
Open both Surprise Attack Poké Balls and set both meters at the
base of the Poké Balls to their starting position.
4
Load your Pokémon Battle Figure into your Surprise Attack Poké
Ball and the Training Partner’s Pokémon Battle Figure into the
Training Partner’s Surprise Attack Poké Ball.
5
Select 3 attack disks that you want to use as your own and select
3 different attack disks that will be used by the Training Partner.
6
Flip the Training Partner’s 3 attack disks upside down and shuffle
them randomly.
SET-UP
1
Complete the 1-Player Set-Up (See above)
2
Select one of the Training Partner’s upside down attack disks,
flip it over, and load it into the Training Partner’s Surprise
Attack Poké Ball.
3
Pick an attack disk for your Battle Figure that you think would
work best against the Training Partner’s disk.
4
When you’re ready, load 1 of your 3 attack disks into your
Surprise Attack Poké Ball.
5
Shut both Surprise Attack Poké Balls and twist both
counterclockwise until they lock into place.
6
Press the red buttons at the base of both Surprise Attack Poké
Balls to cause them to rotate towards each other, open, reveal
the Pokémon inside, and spin the attack disks.
7
When the attack disks stop spinning, check the red arrow on the
base of the Surprise Attack Poké Balls to see the result of the
Training Partner’s spin and your spin.
8
Lower both meters based on the results.
9
Remove the attack disks from both Surprise Attack Poké Balls and
discard them from play.
10
Repeat Steps 1-9 until the round ends after 3 spins or a player’s
meter is depleted.
11
Win the round by depleting the Training Partner’s meter first or at
the end of 3 spins have a more full meter than the Training Partner.
12
Training Rules gameplay consist of 1 Round.
TRAINING RULES
LOAD
THE
ATTACK
DISK
LOAD FIGURE
BETWEEN
FIGURE CLAMPS
METER
DEPLETED
METER STARTING
POSITION
EXAMPLE: Your spin resulted in an attack of 3 and the Training Partner’s
spin resulted in an attack of 2. You lower your meter by 2 and the
Training Partner’s by 3.
a.
NOTE: If any player lands on a block ( ), this results in the opponent’s
attack being an attack of 0. Both player’s meters remain unchanged.
b.
©2021 Pokémon. ©1995–2021 Nintendo / Creatures Inc. / GAME FREAK inc. TM, ®, and character names are trademarks of Nintendo.
©2021 Pokémon. ©1995–2021 Nintendo/Creatures Inc./GAME FREAK inc. TM, ® et les noms des personnages sont des marques de Nintendo.
MADE IN CHINA
