Battery Compartment
2. Train
1. Control Wand
3. How to Play
Use a Phillips/cross-head screwdriver (not included) to loosen screws in battery compart-
ment cover (screw remains attached to cover). Remove cover and discard depleted
batteries. Replace with 4 x 1.5V AAA (LR03) size batteries. Follow the (+) and (-) markings in
the battery compartment and on the batteries to ensure proper battery placement.
Replace cover and tighten screws.
Battery Compartment
Use a Phillips/cross-head screwdriver (not included) to loosen screws in battery compart-
ment cover (screws will remain attached to cover). Remove cover and discard depleted
batteries. Replace with 2 x 1.5V AAA (LR03) size batteries. Follow the (+) and (-) markings
in the battery compartment and on the batteries to ensure proper battery placement.
Replace cover and tighten screws.
- Turn on the train. The on/off switch is located on the bottom of the toy.
- Turn on the control wand. The on/off switch is located on the back of the toy.
- Connect the floats to the train in the desired order.
- Press and hold the music note button on the control wand. The train will move forward
and follow the wand’s movement until the wand’s music note button is released.
While in motion the train and floats will have the following functions:
PLAYS SOUNDS
SMOKE UP AND DOWN
* FOR SAFETY PURPOSES, THE TRAIN’S FUNCTIONS WILL STOP WHEN IT’S UPSIDE DOWN.
TRAIN FOLLOWS CONTROL
WAND’S MOVEMENT
ON /OFF/TRY ME
Switch
ON /OFF
Switch
Remove the depleted batteries and insert
the new ones with the correct polarity indicated
inside the compartment.
Replace cover and tighten screws.
Remove the depleted batteries and insert
the new ones with the correct polarity indicated
inside the compartment.
Replace cover and tighten screws.
Bottom View
Bottom View
2
4
Important: This toy works best if you have a clear path between the control wand and
the train. The maximum range of the control wand is 4 feet.
NOTES:
• lf the train starts to lose power, it may experience loss of function and performance.
If this happens, simply replace batteries in the train or the wand controller.
•The train is operated by radios waves. It is possible that the train may not perform
properly due to interference from devices, such as cordless phones, hair dryers, radios,
walkie-talkies or other radio-controlled toys. For best results, turn off other devices.
• To preserve battery life, turn off the train and the control wand after playing.
• Train and wand control will not operate properly if it is separated by a physical structures,
such a walls, furniture, tables etc.
A
B
C
D
Flower float
Dino float
Unicorn float
Smoke raises and lowers while in motion, music and phrases will be played each time the
wands button is pressed.
3
3
0
Train
Seat swings side to side.
Unicorn spins.
Dino rocks back and forth.
ON / OFF
ON OFF
TR
Y/ME
• Float is not intented to be used for big characters (only small characters).