Playing a CD:
Programing the CD Player:
1. Set the FUNCTION SELECTOR to the CD position.
2. Insert the CD with the printed side facing up and close the CD door.
3. The total number of tracks in the entire CD will appear on the LED display.
4. To start playing the CD, press the PLAY/PAUSE button.
5. Adjust the VOLUME CONTROL to the desired volume level.
6. To stop playing the CD, press the STOP button.
To skip tracks:
1. During play or pause mode, press the SKIP NEXT button will go to the next track.
2. During play or pause mode, press the SKIP PREVIOUS button will go back to
the beginning of the track.
3. After step 2, press the SKIP PREVIOUS button again will go back to the
previous track.
The programming of the CD player should be done during STOP mode.
1. Press the PROGRAM button, the LED display will show ‘01‘ and flash
continuously.
2. Press the SKIP NEXT or SKIP PREVIOUS buttons to select the desired track.
3. Press the PROGRAM button again to store this track in memory, the LED will
show ‘02‘ and flash continuously.
4. Repeat steps from 2 to 3 to store more tracks in memory. You can store up
to 20 tracks in the memory.
5. Press the PLAY/PAUSE button to play the disc in the programmed order.
6. To stop playing, press the STOP button.
7. To cancel the programming list, press the STOP button and open the CD
door or select a different function (AUX/OFF or RADIO).
Repeat Mode
Repeat 1: Press the REPEAT button once, the repeat LED indicator will light
and flash continuously. This single track will be repeated.
Repeat All: Press the REPEAT button twice, the repeat LED indicator will
stay lighted. The whole disc will be played continuously.
To Cancel Repeat Function: Press the REPEAT button until the lighted repeat
LED indicator turned off.
-8-
