Page
3
of
5
Anchor Kits:
Model OBV-100AK – Insert Anchor
An inverted design that elements the potential of sand and water contamination that can make removal
difficult.
Anchor is completely removable.
Provided with a cap and identifying flag to safely identify its location beneath the sand.
Upright Installation and Removal:
To install the poles, totally clean away all sand from around the anchor. Wipe down the anchor stem and apply a light
coating of anti-seize lubricant or grease. After pole is installed backfill the area with sand.
To remove the pole, total dig away the sand surrounding the base. Slide the pole off the anchor stem. Cap-off the
anchor stem with the cap and flag provided.
OBV-100AK
Insert Anchors
