Rev: D
Page
5
of
8
Figure 4
Install Poles:
Before inserting the poles into the sleeves, check to make sure:
1.
The cleat installed opposite of pulley.
2.
Run the hoisting rope thru pulley
a.
Secure both ends together (loosely).
3.
Note orientation (see Figure 5).
Figure 5
1/4"-20 x 8 1/2" HEX HD SCREW
(3X) 1/4" WASHER LOCK
(4X) CORD LOOP ASSEMBLY
5/16" x 3 1/8" SNAP HOOK
1/4-20 ACORN NUT
1/4"-20 NYLON LOCK NUT
1/4" FLAT WASHER
6" LONG CLEAT
~ BACK SIDE ~
POLE
1/2”-13 x 8” HEX HD
1/2" FLAT WASHER
5/16" x 3 1/8" SNAP HOOK
1/2”-13 EYE NUT
1/2" LOCK WASHER
1/2" FLAT WASHER
~ BACK SIDE ~
Net length divided by spacing = pole distance
Intermediate Pole
End Pole
Cleat
Pulley
Net
Slide the cord loops onto the poles and place them just above the cleat so they will be
held in place while installing the poles.
