Rev: F
Page
5
of
8
Figure 4
Install Poles:
Before inserting the poles into the sleeves, check to make sure:
1.
The cleat is installed opposite of pulley.
2.
Run the hoisting rope thru pulley
a.
Cleat both ends of rope (loosely).
Insert the poles into the ground sleeves. Orient the poles so the eyebolts and swivel
pulleys are facing the field.
It is suggested that the wild end of the hosting rope be passed thru the opening of the
cleat and a figure eight stop knot be tied at the end of the rope. This will prevent the line
from getting out of reach for the operator or worse the line inadvertently coming off the
pulley during a game.
1/4"-20 x 8" HEX HD SCREW
1/4"-20 NYLON LOCK NUT
1/4" FLAT WASHER
6" LONG CLEAT
~ BACK SIDE ~
POLE
1/2”-13 x 8” HEX HD
5/16" x 3 1/8" SNAP HOOK
1/2”-13 EYE NUT
1/2" LOCK WASHER
1/2" FLAT WASHER
1/2" FLAT WASHER
~ BACK SIDE ~
