ELITE Series Adjustable Portable Backstop Instructions
- 7 of 28-
JSL-Inst039
www.jayprosports.com
6
Installing Backboard/Rim
WARNING: DO NOT REMOVE SAFETY STRAP OR QUICK-RELEASE PIN UNTIL THE BACKBOARD
AND RIM HAVE BEEN INSTALLED. FAILURE TO COMPLY MAY RESULT IN SEVERE OR FATAL
INJURY AS WELL AS SIGNIFICANT DAMAGE TO SURROUNDING STRUCTURES.
1.
Lower both feet (Figure 6-1) using the supplied socket wrench until
both side 2-by-4’s of the base are level (Figure 6-2).
Figure 6-1: Lower feet using supplied socket wrench.
Figure 6-2: Lower feet until bottom horizontal 2" x 4" ‘s are level.
2.
Attach left and right backboard support arms to slots in boom using
the 5/16”-18 x 3/4” carriage bolts (2X), 5/16” flange nuts (2X), 5/16”
flat washers (4X), and 5/16” split washers (2X) as shown in Figure 6-3.
Hand-tighten the nuts; do not use a wrench.
