IMPORTANT
!
Before you activate the electrical mechanism, lay your furniture on its side and cut the straps that hold the transformer.
Then, remove it,
put it next to your chair,*
on the floor, and plug it into an electrical outlet.
*
The manufacturer will not be held responsible if any accident occurs because the transformer has not been removed from underneath the furniture.
Electric Outlet
Transformer
Electric Motor
SINGLE RECLINER SEAT
MULTIPLE SEATS
"Y" SPLITTER
If you have two electric motors, connect
both wires to the "Y" splitter, then connect
the "Y" splitter to the transformer.
Electric Outlet
Transformer
Two Electric Motors
"Y" Splitter
WARNING
Do not immerse in water or other liquids at any time. To clean, wipe with a damp cloth. Do not store or operate the device in a high humidity area.
Do not store or operate the device in an environment that is subject to explosion hazards or open fire.
Do not open or tamper with the device. There are no user serviceable parts in these units. Opening the device will immediately void the warranty.
Ensure correct polarity is used when connecting motors, etc. This is normally governed by the original plugs and connectors. Do not short circuit.
The device should be recharged within the norm temperatures of 0°C to 40°C (32°F to 104°F).
Find the wire from your electric motor
and connect it to the transformer.
STEP 4
activate the electrical mechanism
