Jayco Recon ZX 2008, Руководство пользователя

Страница: 75 / 106

SECTION 11
CAMPING & OPERATING
71
K
EYS
Several keys are provided when you
purchase your RV. Most keys have an
individual key number stamped on the plate.
Record these key numbers and keep the
information in safe place. You can order a key
blank from your dealer to have duplicate keys
made. If you lose the keys, contact your
dealer or a locksmith for assistance.
Make sure the keys are not inside the RV
before you close and lock the entrance
door.
E
NTRANCE
D
OOR
W
ITH
S
CREEN
D
OOR
The entrance door is located on the curbside
of the RV. Always hold onto the entrance door
when opening or closing it as damage caused
because you failed to do so is not
warrantable.
BE SAFE, LOOK BEFORE ENTERING OR
EXITING YOUR RV!
H
IDE
-A-B
ED
(
IF SO EQUIPPED
)
The hide-a-bed sofa functions much the same
as a regular residential hide-a-bed sofa. To
make the hide-a-bed sofa into a bed, remove
the seat cushions and pull the strap located at
the front of the sofa seat bottom out towards
you firmly and gently.
To convert the hide-a-bed back into the
upright sofa position, reverse the process
(make sure to pull the seat belts out into their
usable positions). Be sure to hold the sofa
strap firmly to ensure the hide-a-bed sofa
does not suddenly drop shut. Refer to the
furniture manufacturer’s care instructions for
this product.
B
OOTH
D
INETTE
(I
F
S
O
E
QUIPPED
)
The dinette is designed to seat up to four
adults. You can access the dinette bench
storage by removing all the cushions and
lifting the bottom seat supports. If the dinette
bottom seat support is screwed shut, it is to
protect factory-installed equipment (do not
use that area for storage). To convert back to
a booth dinette, reverse the process.
The booth dinette can be converted into a
bed. To convert, remove all the cushions from
the booth dinette. Lift the tabletop, remove the
detachable table legs and place the tabletop
on the ledges provided between the booth
dinette benches. Lay the seat back cushions
against the back of the booth dinette bench.
Lay the dinette seat bottom cushions in
between the seat back cushions. The area
where the cushions meet should be slightly
raised. Push the raised cushion ends down
gently. The cushions are designed to fit
snugly. Reverse this process when converting
back to the booth dinette.
C
OUCH
/J-
STEEL
D
INETTE
(I
F
S
O
E
QUIPPED
)
To store the bed/sofa and pull down bunk for
travel, always properly raise the mini-blinds.
Be aware of moving parts at the end of the
bed/sofa when changing from one position to
the other. Keep all loose clothing, fingers, etc.
away from the ends.
1. Release the buckle holding the
couch/dinette in place against the wall.
2. Pull down on the metal support bar under
the couch/dinette. The legs will fold out
and into place. When pulled out from the
wall, the unit will be in the bed position.
3. To set up as a couch/dinette, stand at the
end of the couch/dinette seat. Pull up on
the top of the back rest and the front edge
of the seat to create a V-shape. Push the
seat toward the back rest to move the unit
into the set up position.
4. To move it back into the bed position, pull
up on the front edge of the seat to create
the V-shape.
Make sure the entrance door is completely
closed and locked when traveling. Locking
the door helps prevent it from opening
unintentionally.