Jayco Greyhawk 2015, Руководство пользователя

Страница: 107 / 121

CLASS C MOTORHOME SECTION 12 – INTERIOR
12-1
C
LEANING
T
HE
I
NTERIOR
To keep the value of your motor home, perform regular maintenance using the
proper materials and procedures. Using the wrong cleaner may result in damage
to the surfaces in your motor home. Check with the manufacturer’s information for
the recommended cleaning agent. If in doubt, check to see if the cleaner will
cause damage by testing a small area out of sight or contact your independent
Jayco dealer for assistance. Do not use flammable liquids or sprays to clean the
motor home.
H
IDE
-A-B
ED
(
IF SO EQUIPPED
)
The hide-a-bed sofa functions much the same as a regular residential hide-a-bed
sofa. To make the hide-a-bed sofa into a bed, remove the seat cushions and pull
the strap located at the front of the sofa seat bottom out towards you firmly and
gently.
To convert the hide-a-bed back into the upright sofa position, reverse the process
(make sure to pull the seat belts out into their usable positions). Be sure to hold
the sofa strap firmly to ensure the hide-a-bed sofa does not suddenly drop shut.
Refer to the furniture manufacturer’s care instructions for this product.
J-S
TEEL
S
OFA
(I
F
S
O
E
QUIPPED
)
The J-steel sofa functions much the same as a residential futon. To make the J-
steel sofa in to a bed, lift up on the bottom seat cushion and pull it towards you.
The sofa back will drop down to provide a sleeping surface. For additional comfort
and to reduce fabric damage, you may want to place a cover or air mattress
(customer supplied) over the J-steel sofa when it is in the sleeping position.
B
OOTH
D
INETTE
(I
F
S
O
E
QUIPPED
)
The dinette is designed to seat up to four adults. You can access the dinette
bench storage by removing all the cushions and lifting the bottom seat supports. If
the dinette bottom seat support is screwed shut, it is to protect factory-installed
equipment (do not use that area for storage). To convert back to a booth dinette,
reverse the process.
The booth dinette can be converted into a bed. To convert, remove all the
cushions from the booth dinette. Lift the tabletop, remove the detachable table
legs and place the tabletop on the ledges provided between the booth dinette
benches.
Lay the seat back cushions against the back of the booth dinette bench. Lay the
dinette seat bottom cushions in between the seat back cushions. The area where
the cushions meet should be slightly raised.
WARNING
Always use seatbelts if sitting in the hide-a-bed while the motor home is in
transit
WARNING
Always use seatbelts if sitting in the sofa while the motorhome is in transit.