![background image](http://html1.mh-extra.com/html/jayco/conventional-travel-trailer-2004/conventional-travel-trailer-2004_owners-manual_3518149038.webp)
SLIDEOUT ROOM OPTION
The slideout room is designed for additional floor space and comfort. Mechanical
components are gear driven. Read ALL slideout instructions before operation.
I
CAUTION: Do not place excessive weight in the slideout room. It can
cause the slideout room to malfunction and cause damage to the slideout.
Components
The slideout system has numerous major components and are as follows:
• One inner rail drive assembly to support the room weight.
• For electric systems, a 12-volt DC motor and drive shaft will operate the room using
energy from an on-board auxiliary battery.
• For electric systems, a specially designed auto reset fuse with load sensing capability
stops the motor when the room reaches its fully extended or retracted position.
I
WARNING:
V
Ensure that the trailer is level before operating the slideout room. Water
leaks and other problems could result if the slideout is operated without
leveling the trailer.
V
Ensure there are no people or obstructions blocking the path of the room
when it is moving.
V
Keep away from the slide rails when the room is in motion.
V
The gear assembly may pinch or catch on loose clothing causing personal
injury.
V
Ensure the slideout is in the closed position prior to hooking the unit to the
tow vehicle.
Failure to follow these instructions could result in serious injury or death.
Caution: After the slideout is extended, verify that the corners of the
black rubber seal are set up correctly. The corners of this seal are cut
at a 45 degree angle. The top of the seal must overlap the side of the
seal to avoid the possibility of water penetration. Fig. 6
Electric Operation
EXTENDING ROOM
1. The batteries must be fully charged and connected. The travel
trailer should be hooked up to 120-volt AC power, if possible.
2. The travel trailer must be level and the stabilizer jacks in the down position.
Caution: Additional support jacks are not needed under the slideout. Damage can
occur to your slideout room from improper use of support jacks.
3. Locate the slideout room control switch (Fig. 7).
4. To move the room out, press the “OUT” button on the switch and hold
it until the motor stops. Release the button. Travel time -
approximately twenty-five seconds.
RETRACTING ROOM
1. Remove all objects left between the slideout and cabinetry.
2. Press the “IN” button to bring the room in and hold it until the motor
stops.
3. Release the button.
28
Setting Up Camp...
Fig. 6
Fig. 7
Содержание Conventional Travel Trailer 2004
