![background image](http://html1.mh-extra.com/html/jayco/2014-pinnacle-towables/2014-pinnacle-towables_user-manual_635977048.webp)
SECTION 4
TOWING & SET-UP
JAYCO TOWABLE
4-6
Bumper mounted
The spare tire bracket can be released and extended down to access a storage
compartment at the rear of the trailer without removing the tire.
To extend the tire down
1. Remove the cotter key from the pin holding the tire
carrier in place.
2. Remove the pin and extend the tire carrier away from
the trailer.
3. Always return the tire carrier to the upright position and
lock it in place while traveling.
To remove the tire from the tire carrier
1. Remove the lug nuts holding the tire in place.
2. Remove the support bracket from the bottom lug.
3. Pull the tire from the tire carrier.
Fig. 4.5 Bumper mount
To install the tire on the tire carrier
1. Place the tire on the carrier with the top lug bolt inserted into one of the holes
in the tire rim and the bottom lug bolt in the center of the rim.
2. Install the top lug nut.
3. Place the support bracket over the bottom lug bolt across the center of the
rim.
4. Install the bottom lug nut over the support bracket.
5. Make sure the lug nuts are tightened securely before returning to travel.
W
HEEL
L
UGS
After your first trip, check the wheel lug torque periodically for safety. Check the
wheel lugs after winter storage, after a wheel removal, before starting a trip or
following extensive braking. Use the correct star pattern sequence to attach the
RV wheels (see
Wheel Lug Torque Chart
.)
1. Start all nuts by hand to prevent cross threading.
2. Tighten the nuts in the sequence shown.
3. Tighten the lug nuts equally in stages as indicated for your trailer's wheels
(see
Wheel Lug Torque Chart
).
Check and re-torque after the first 10, 25 and 50 miles (16, 40 and 80
kilometers). Thereafter, check and maintain the torque according to the
listed torque values
(
see
Wheel Lug Torque Chart
.)
NOTE:
The proper method of tightening wheel lug nuts is with a properly
calibrated torque wrench and socket, not with an impact wrench or by hand. Do
not use a 4-way lug wrench or any other type of wrench that does not measure the
actual pressure applied to the lug nut.
Because of the importance of having proper torque on the wheel lug nuts, you
should always have the wheels mounted and properly torqued by a qualified
technician using the proper tools.
Содержание 2014 PINNACLE TOWABLES
