Spare Tire (Option)
The following procedures should be used in securing the spare tire in the travel position:
1. Put the steel hoist lift support at the end of the cable through the rim of the tire.
a. The clips need to be seated inside the hole of the rim.
b. The tire valve stem MUST be pointed in the down position (away from the bottom of
the trailer). The hoist will not seat the tire correctly if the valve stem is toward the
trailer.
2. Use the crank handle to lift the tire into the travel position. Two crisp breaks must be
heard and felt to insure proper seating of the tire for travel.
The tire must be in contact with the tire contact surface to be in the travel position.
I
WARNING: DO NOT exceed the maximum load capacities of 100 lbs. For
the hoist. DO NOT use air driven guns or impact wrenches to lift the tire
into travel position.
Tire Covers - Vinyl (Option)
Your tires are manufactured with components that cause “bleeding” onto the tire cover.
To prevent this, it is recommended to use a separator (garbage bag, paper, cloth, etc.)
between the tire and the cover.
CLEARANCE LIGHTS
Inspect all exterior lights to make sure they do not have moisture trapped inside. The
“weep” holes at the bottom of the lights must be kept open to allow moisture to escape from
the light fixture.
68
VALVE
STEM
UP
LIFT PLATE BOTTOMED
OUT AGAINST LIFT
NO
CABLE
TIRE LIFT MOUNTING SURFACE
TIRE NOT IN CONTACT
WITH SURFACE
TIRE
CONTACT
SURFACE
WRONG WAY
Fig. 33
CORRECT WAY
TIRE LIFT MOUNTING SURFACE
TIRE CONTACT SURFACE
VALVE STEM
down
Lift Plate
6 in. Cable
Fig. 32
Содержание 2004 Conventional Travel
