13
Autoranging Digital Multimeter
4-6.Continuity Check
WARNING:
To avoid electric shock, never measure continuity on circuits or wires that have voltage
on them.
1.Set the function switch to the
Position.
Ω
2.Insert the black test lead banana into the
COM
Input Jack; Insert the red test lead banana into
the
Positive
Input Jack.
3.Press the
MODE
Button until the “ ” symbol appears in the display.
4.Touch the test probe tips to the circuit or wire you wish to check.
5.If the resistance is less than approximately 100
, the audible signal will sound, the display
Ω
will also show the actual resistance.
Autoranging
Digital Multimeter
OFF
mA
μ
A
V
Auto
Power
Off
Ω
V
MODE
MAX
COM
V
Ω
mA
μ
A
200mA/600V
CAT III 300V
CAT II 600V
